|
|
|
|
|
|
|
|
MS-1 - $55.00
|
|
Single Channel Mic Splitter
|
|
Split one microphone input into 2 discreet transformer isolated microphone outputs. Unit has one XLR input, one Direct XLR output (allowing phantom power to pass), one isolated XLR output and a ground lift.
|
|
|
|
|
 |
|
|
MS-4 - $179.00
|
|
4 Channel Mic Splitter
|
|
Each channel on front panel provides an XLR female input, an isolated XLR male output (to keep each signal isolated from the other), a ground-lift switch and a -20 db pad switch (to cut back "hotter" line level signal if necessary). On the rear panel, each channel has an XLR input (your source can come in from front or back) as well as a "loop" output (non-isolated). The transformer isolation allows multiple splits without the undesirable effects of impedance drop or DC voltage leak between consoles or recording devices. rackmount depth is 5" |
|
|
|
|
|
|
|
SA-1 - $89.00
|
|
A/B Switch Box
|
|
Durability separates this unit from most others. 18 gauge steel box and industrial switches can handle the most demanding stomping,. This A/B box switches from one input into another, or allows both inputs ON at the same time. Auxiliary In/Out provides effect looping. LED distinguishes between A & B channels. |
|
|
|
|
|
|
|
MC-1 - $59.00
|
|
Isolated Microphone Combiner
|
|
Combine 2 discreet microphone signals into a single transformer isolated output. Features two isolated XLR female inputs, one XLR male output and a ground lift. Convenient for situations where you are short on mixer channels. Combine two bass drums, backing vocals, stereo guitar amps, etc. |
|
|
|
 |
|
|
MC-4 - $169.00
|
|
4 Channel Microphone Combiner
|
|
Each channel takes two mic-level signals and combines them into one mic-level output. The MC-4 is great for combining microphone signals when you don't have enough channels on your board to plug in all of your stage mics. On the front panel, each channel has two isolated XLR microphone-level inputs, which are each equipped with a ground-lift switch. On the rear panel, each channel has parallel XLR male outputs (acts as a Y-cable - just in case!). Due to the D.C. blocking characteristics of the transformers, this unit will not pass phantom power. The MC-4 is like having four Horizon MC-1 combiners in a single rack space. Rack depth is 5". |
|
|
|
|
|
|
|
AL-1 - $99.00
|
|
Active Direct Box
|
|
The AL-1 accepts instrument, line or speaker level inputs and actively converts them to a mic level output for direct interface with a console or amplifier. The input side features a 1/4" unbalanced input jack, a 1/4" loop through jack, a 120db input pad switch and a ground lift. The back has an XLR male mic level output and an adjustable output gain trim pot to obtain 0db to -20db output swing. The 9 volt battery disconnects when the input jack is unplgged. |
|
|
|
|
|
|
|
SL-1 - $45.00
|
|
Passive Direct Box
|
|
An absolute must for live or recording situations where guitars, keyboards or other instrument level signals must input to a mic level snake or mixer. The input side features a 1/4" mono input jack, , a 1/4" loop through jack and a ground lift switch. Output side is a single XLR male connector. |
|
|
|
|
|
|
|
SL-2 - $65.00
|
|
Passive Direct Box with Pad
|
|
Has every feature of the above SL-1 direct box plus offers a -20db pad switch to help reduce "hotter" line level audio components for input to mic level snakes and mixers. |
|
|
|
 |
|
|
SL-4 - $189.00
|
|
4 Channel Rack Mount Passive Direct Box
|
|
For appplications requiring multiple interface of unbalanced Hi-Z equipment to balanced Lo-Z mixer inputs (e.g. multi-keyboardists).. On the front panel, each channel has a HiZ input with a loop-thru jack, a ground lift switch and a -20 db pad switch for using either instrument level or line level sources (keyboards, synth-modules, midi-drums). On the rear panel, each channel has a Hi-Z input/output jack and XLR male Lo-Z output as well as a balanced 1/4" output. This unit is like having four Horizon SL-2 direct boxes in a single rack space. Rack depth is 5". |
|
|
|
|
|
|
|
SPL-1 - $59.00
|
|
Passive Speaker Level Direct Box
|
|
This unit is a great way to get your instruments amplifier sound into the mixing console or recording device without "mic'ing" it". Features a 1/4" Amp In and Amp Out jack (for use with speaker cable), a ground lift and a male XLR output for direct in to board or recorder. |
|
|
|
|
|
|
|
STL-1 - $65.00
|
|
StereoLine Direct Box
|
|
This multi-mode direct box functions as two separate direct boxes in stereo mode. In the mono mode, two high impedance unbalanced input signals can be combined into one low impedance isolated balanced output to conserve channels in a snake. Also in the mono mode, two high impedance unbalanced signals can be combined into one low impedance balanced signal, and split into two separate isolated mono output signals. Comes with two shunts on the input to eliminate feedback. |
|
|
|
|
|
|
|
PB-8 - $189.00
|
|
8 Channel Press Box
|
|
The Horizon PB-8 Pressbox is perfect for press conferences or any situation requiring a single mic signal to be "split" multiple times. Its features include a rugged 18 gauge formed steel enclosure, a single XLR female mic level source input, a "loop" output (to go to a mixing console to interface with an external Phantom Power Supply, or to "daisy chain" this unit to a second PB-8 for additional isolated outputs), and eight discreet isolated XLR male outputs (due to the D.C. blocking characteristics of a transformer, the isolated outputs will not pass Phantom power). The connectors are recessed to resist damage. |
|
|
|
|
|
|
|
HSM-1 - $75.00
|
|
Signal Mate Tape Deck Direct Box
|
|
Accepts audio signal from any stereo tape deck or CD player via RCA inputs. The signal is then isolated and combined into a single low-impedance balanced XLR output to conserve channels in a house system. Independent volume controlsfor each channel are provided for balancing signal output. A ground-lift switch also is provided to eliminate hum. |
|
|
|
|
|
|
|
HCT-LD - $45.00
|
|
Little Detective Cable Tester
|
|
Full support for XLR, RCA & 1/4" jacks in any combination. they can be mixed and matched on either end of the cable. Unit displays continuity of cable connections and is housed in a low profile aluminum box. Compact enough to fit in most guitar cases. |
|
|
|
|
|
|
|
HCT-BD - $125.00
|
|
Big Detective Cable Tester
|
|
The ultimate cable tester, extremely user friendly housed in a pro quality aluminum box and based on CMOS technology. Dual rows of LED's sequence to tell you what is being sent from one end of the cable to the other. Includes displays for normal continuity, pin to pin connection, proper phasing and even connection from one style of connector to another in any combination- XLR, RCA, 1/4" mono & stereo, , MIDI, Speak-On, 1/8" mini and BNC. |
|
|
|
|
|
|
|
IL-2 - $65.00 | IL-3-$65.00
|
|
Line Level Isolation Splitter Boxes
|
|
IL-2: Pin 2 hot XLR, IL-3: Pin 3 hot XLR
Quality 1:1 line level oitput transformers for applications requiring a high degree of electrical isolation only transformers can provide. Applications include- servo balancing, breaking ground loops between pieces of equipment with unbalanced lines, floating the unbalanced outputs of a crossover unit or an unbalanced mixer output that must run down long cables to power amp inputs. Features a 1/4" input(balanced or unbalanced), a 1/4" loop out with an XLR male output and ground lift switch. |
|
|
|
|
|
|
|
HPP-1/1 - $109.00
|
|
Phantom Power Supply
|
|
Single channel stand alone unit
Also avaialble: HPP-8/8 - $259.00
rack mount 8 channel unit
|
|
|
|
|
|
|
|
|
|
